Bathroom tiles will become white and very shiny with this magic ingredient
Shiny white bathroom tiles, which give the impression of extreme cleanliness and hygiene, are every woman’s dream.
Those who are especially concerned about cleanliness will want to walk into the bathroom and find it super clean , free of stains, water splashes and streaks.
It is difficult to keep it that way, because normally a perfect bathroom in perfect condition is only achieved at the beginning, when everything is new. Especially the tiles, which easily turn yellow over time , including the grout.
Fresh and clean bathroom for long and pleasant moments of relaxation.
The bathroom is the place of relaxation, where you can more or less spend more time enjoying intimate moments , taking relaxing and refreshing showers in summer, hot and scented baths in winter.
It also welcomes women and their time-consuming makeup, or checks in when you’re late. In short, it’s like a second living room, but more private. Sometimes cleaning is postponed precisely because of this, especially when there are a lot of people in the house, it’s hard to find a free bathroom .
This ends up becoming a big problem, because over time the surfaces become ruined. It must be said, however, that there are a thousand ways and secrets that allow you to clean even bathroom tiles naturally , therefore without using chemicals of any kind, obtaining incredible results.
How to clean tiles and leave them white and shiny again
Whether it’s the shower tiles or the wall tiles, just a few drops of water that are not dried properly are enough to cause the annoying limescale that makes even a new bathroom look old and neglected.
To remove them, you will need to spray the affected surfaces, i.e. the shower stall or sink, with a mixture of water and white vinegar, of the same size. Then let the solution act for a few minutes and dry with a spatula. Finally, polish, using an antistatic cloth . The result will be exceptional.
A second remedy is always water and vinegar, but with a few drops of dish soap or Marseille soap added. Mix them together and apply to the tiles with a spray bottle. Then rub with a non-abrasive sponge and rinse with warm water. When finished, dry with a dry cloth.
How to whiten bathroom tile grout
The grout between tiles is a sensitive area. Water that falls on the floor when we wash our hands, or when we take or finish a shower collects there . Cleaning them is quite simple, but obviously takes some time.
Then, take a toothbrush, prepare a glass with baking soda and another with hydrogen peroxide. Lightly moisten the powder with drops of hydrogen peroxide, dip it into the toothbrush and scrub the joints well. A few super-vigorous strokes are enough to leave them practically as good as new.
Alternatively, you can use steam , which is obviously effective but requires no effort or commitment. In just a few minutes, the tiles and grout in your bathroom are perfect again.
Tips to avoid staining or ruining tiles
Obviously, before proceeding to clean all the grout and tiles, it is advisable to test the spray on the surfaces and then continue if the tiles remain intact. There are some materials on which certain products cannot be used, as they risk becoming stained.
For this reason, you must be careful. The result will be impeccable, the cleaning and sanitizing action will be deep, and you will not regret using specific products in any way.