how to create an automatic home drip irrigation system

Welcome Tips how to create an automatic home drip irrigation system

Are you looking for a sustainable and worry-free way to keep your plants hydrated? Look no further! Here’s a step-by-step guide to creating your own home and automatic drip irrigation system using simple materials you probably already own. This eco-friendly solution not only recycles disposable materials, but also ensures efficient water usage and can provide up to three days of self-watering.

Method 1: Automatic Drip System Using a Plastic Bottle and Rope

Materials needed:

• 1 empty 2 liter plastic bottle
• 1 rope about 40 centimeters long
• 1 IV tip (the type used in IV medical bags)
• 1 roller clamp (also from set IV)
• Scissors or a sharp knife

Instructions:

1. Start by cutting the bottom of your plastic bottle about 80% of the way around to create an opening.
2. Make two opposite holes just below the cutting level.
3. Thread each end of the rope through these holes and tie a knot inside the bottle to secure it.
4. Next, poke a hole in the bottle cap, making sure it is slightly smaller than the diameter of the IV tip.
5. Insert the tip into the hole you just made in the cap.
6. Hang the bottle above the plant to be watered and fill it with water.
7. Use the roller clamp to adjust the flow rate as needed.
8. A 2 liter bottle filled with water should be enough to irrigate your plant for about two days.

Method 2: Automatic Watering System for Plants Using Used Plastic Bottles

Materials needed:

• Empty plastic bottles
• Cotton or polyester rope
• Scissors
• Knife or screwdriver
• A small soldering iron or heated metal rod

Instructions:

1. Start by using a soldering iron to carefully create holes in the sides of the bottle to accommodate the strings.
2. Cut the ropes into 25 cm lengths and insert them into the holes you made.
3. Use scissors to cut an “X” shape where you want to insert a hose for the water supply.
4. This system is designed so that when you remove the hose, the hole closes tightly, preventing the entry of insects such as mosquitoes.
5. Place these bottles in your garden, for example among the cabbages, and set the drip rate to about 15 seconds.
6. This method is particularly useful in areas where water is scarce as it offers a viable alternative to traditional irrigation and helps conserve water.

By following these simple methods, you can set up an automatic home drip irrigation system that will ensure your plants receive the right amount of water even when you are not there to care for them. This DIY approach not only saves water but also reuses plastic bottles, making your gardening efforts both eco-friendly and effective.

Glaucoma And Cataract Disappear! Vision Returns 99.7% In 6 Days