How to remove black mold from bathroom silicone in 10 minutes

To prevent water leaks and ensure the hygiene of your bathroom, cleaning and maintaining the joints is essential. Shower, bathtub and sink seals help maintain watertightness and combat moisture. Unfortunately, over time the seams can darken and show mold stains. In addition, re-grouting the bathroom can be a costly and time-consuming process. To help you clean the silicone joints in your bathroom and remove mold, here is a great trick.

Redoing the silicone seal on a shower or sink can be a complex task if you are not used to DIY. Fortunately, a few tips can effectively remove dirt, mold and residue that can damage seals. To give your bathroom a boost, here is a method to clean a silicone seal and remove embedded black stains.

A tip for removing mold from a silicone joint

Among the many household products that can be used in many ways, we find white vinegar. This chemical-free ingredient can both clean dirty objects and whiten, disinfect and descale various surfaces. Ideal for polishing the bathroom or removing limescale, this natural product is great for removing mold that appears on the grout of the tiles in the bathtub or shower.

Vinegar can disinfect and clean various surfaces – Source: spm

To carry out a joint cleaning, you will need:

• 2 cups white vinegar
• ½ cup dishwashing liquid

Start by pouring the white vinegar into a container, then add the dishwashing liquid and mix everything until you get a homogeneous liquid. Then use a sponge to scrub and remove the mold stain.

White vinegar to remove mold residue – Source: spm

Leave it on for 20 minutes and then use an old toothbrush to scrub further to remove any embedded residue.

Other tips for cleaning   silicone joints

To clean silicone joints, remove dirt and prevent mold growth, there are other eco-friendly ingredients you can use:

• black soap

Liquid black soap – Source: spm

Black soap can make your bathroom sparkle and combat bad odors related to excess moisture. Pour some liquid black soap onto an old toothbrush and vigorously scrub the silicone seals to clean them.

Leave on for 15 minutes, then rinse with warm water and use a microfibre cloth to dry the joints.

• Baking soda

Baking soda has bleaching and disinfecting properties and remains an indispensable cleaning product. To clean your silicone joints, mix 3 tablespoons of baking soda with 3 tablespoons of white vinegar. Dampen an old toothbrush with this solution and gently scrub your joints.

Baking soda has many virtues – Source: spm

Leave it on for 10 minutes before rinsing with warm water. Use a dry cloth to wipe your joints.

• the clay stone 

Clay stone is one of the grandmother’s tips that promote ecological and practical cleaning. To give shine to your silicone joints, use a brush soaked in clay to scrub each joint. Leave the product to act for ten minutes and then rinse with warm water. With a dry sponge, remove excess moisture.