25.05.2024

How to uncover kitchen burners so they light well

By Lesia

We all agree that the kitchen requires daily maintenance work, in fact where we cook is constantly used. Which is why, over time, scale and dirt accumulate and unfortunately clog the burners or burners.

How many times have we had problems getting the gas to come out correctly and turning on the burners for cooking, so it is essential that we learn to solve this prob

In fact, we should not take it lightly because a dangerous accident could happen in our home. If the burners do not light well, there could be a gas leak when the knobs are left open, causing an explosion.

Below we will see what steps to take to properly solve and maintain the lighters:

How to uncover kitchen burners so they light well

Let’s look at the following steps to properly maintain the kitchen:

  1. First of all, we remove the burners or burners from the kitchen.
  2. Next, we take a firm, thin wire , to which we place insulating tape on one end. This is as a security measure.
  3. Next step, we introduce the wire into the hole of the gas outlet source, with the tip where it has the insulating tape. But we must do it very carefully, similar to a swab.
  4. We remove  the wire.
  5. Finally, it is time to  place  the burners in their proper place and try turning on the burners.

Surely this basic procedure will solve the problem and the gas will come out without any problem to light the burners!

Recommendations:

We can carry out this maintenance procedure for the kitchen and its burners or burners every time we clean the kitchen or at least a few times a week. The key is to maintain it correctly.

Another suggestion to keep the stoves clean and uncovered is to use a great household ally. We are talking about vinegar, by simply removing the lighters from the kitchen and submerging them in a container with white vinegar and a little lemon juice, we leave it for a while for the products to act.

As we well know, citrus juice acts as a powerful cleaner in the kitchen; when we take it out, we can rinse it and see the results.

If the clogged part has not come out, you can sprinkle a little baking soda on the lighters and scrub with a toothbrush. Finally, rinse it off and let’s observe the results.

Let’s try these homemade tricks to keep the kitchen burners uncovered and lighting perfectly!