Limescale in the shower, but what citric acid: it is only removed with this ingredient
The part most exposed to dirt is the glass . This is where most limescale stains form, because it is constantly in contact with water , whether from shampoo or shower gel.
Water deposited in small drops, even in minimal quantities, forms marks that are then very difficult to remove, even using the appropriate products, which in some cases even tend to make the situation worse.
Removing limescale from the shower is possible, here’s how
Although it may seem impossible to shower in perfect conditions again, you should know that there are simple remedies that do not require great expense or effort, and that give great results.
It is not necessary to use citric acid as many recommend, but simply alcohol vinegar, which can be applied to the lever or shower mixer that is used to change the water temperature and go from hot water to cold water.
The lever often appears dull and full of stains and encrustations. That is why it is important to clean, polish and degrease it every time you wash or flush the toilet. Vinegar with alcohol prevents dirt or lime deposits from occurring from time to time.
Clean the shower head and glass, which are always opaque and full of limescale
The best ingredient to use is alcohol vinegar, which has an important anti-limescale, degreasing and phenomenal brightening power. Then, fill a vaporizer with three parts vinegar and one part water, then spray the mixture directly onto the parts affected by limescale in the shower and leave it to act for 10 minutes.
Then rinse with a sponge, rubbing gently, and the limescale in the shower will be gone. As for the shower head, the limescale in this case is deposited more in the holes and clogs them. This is why the water sometimes has difficulty coming out.
To remove limescale from your shower head, fill a frozen bag with two glasses of vinegar and immerse the hand shower inside. Then tie a knot to secure the bag as much as possible and let the solution sit for an hour. Finally, rinse, the jet of water will be decidedly different, much more decisive.
As for glass, this is also where a lot of incrustation forms, because water splashes out when washing and cleaning the bathroom . Afterwards, in fact, you always have to be very careful and dry the sanitary ware to avoid incrustations.
Vinegar is also used in this case, but it is added to the hot water. Fill a container with hot water and only one glass of vinegar, then dip a sponge in it and use it, well wrung out, to remove lime stains from the shower glass. Be careful not to use the rough part, because it can scratch the glass. Then dry them with a cloth to remove all excess water and proceed with a second soft cloth, preferably cotton, to polish them.
Shower tray, how to remove dirt and scale effectively
Finally, there is the cleaning of the shower tray, where we wash and shave. This collects all the dirt, dust, hair, residues of the products used to wash and soap the body . To clean it, use white alcohol vinegar, which you rub with a sponge.
Leave it to act to remove stains from all parts, then rinse with the shower head and dry with a wrung-out cloth.
Cleaning tiles, how to make them shine again
We proceed to clean the tiles, which also accumulate limescale in the shower. If they are not cleaned well from time to time, they gradually lose all their shine and beauty. Pour a little vinegar on a sponge and rub vigorously, always not on the abrasive side, especially if the tiles are made of materials that scratch easily. Then let the product sit and finally rinse.
These solutions will allow you to have a perfectly clean and always sparkling bathroom. Limestone will be just a bad and distant memory.