Put a balloon in the tap, after 5 minutes you won’t believe the results
It may seem unthinkable to many, but if you put a balloon in the tap, you don’t need anything else to solve a problem that affects many of us intermittently.
Every home is exposed to a number of unexpected events. Over time, wear and tear or accidents can cause breakdowns and damage that require the intervention of an emergency company. Especially since most of these problems cannot wait too long to be solved.
Home maintenance
The comfort of your home can be compromised by these unforeseen events. It is therefore advisable to pay attention and monitor with special care some strategic points of the house.
These are the elements most likely to fail and, with proper maintenance, can be avoided.
Plumbing problems are, as a rule, the most common ones faced by 24-hour repair companies. It is no coincidence that a large part of the house is equipped with a water supply system for the various rooms: bathrooms, kitchen, laundry room, garden, etc.
There are plumbing failures that can be avoided with proper care and maintenance . These include clogged toilets, sinks, and tubs. Monitoring these systems can result in significant savings, as a failure of this type is usually not very cost effective.
Excess lime in the water
Excessive limescale on taps is due to the presence of calcium and magnesium ions in the water coming out of taps. These ions occur naturally in groundwater and can be deposited on the walls of pipes and taps as the water evaporates.
Water hardness , meaning the amount of dissolved calcium and magnesium, can vary depending on the source of the water and the geographic area. In some areas, water may be particularly hard, meaning it contains high amounts of calcium and magnesium.
As water passes through pipes and exits faucets, calcium and magnesium minerals can build up on the walls of pipes and faucets, creating a scale buildup that can clog water flow and cause faucet failure .
Put a balloon in the tap
Many of these have to do with taps and limestone production that restricts water flow. But you don’t need to go to great lengths to unclog taps – sometimes all you need is a balloon.
Yes, if you put a balloon on the tap , that is, if you wrap it around the outlet nozzle, you can solve the problem at very little expense. How? With a product that is never missing at home: vinegar.
Acetic acid, which is the acid found in vinegar, can be used to remove limescale from faucets and other surfaces. Acetic acid is a weak acid that reacts with limescale, dissolving and removing it.
To use vinegar to descale faucets, you can follow these steps:
Pour some white vinegar into a balloon or plastic bag.
Dip the faucet into the vinegar solution and let it soak for a few minutes to clear clogged aerators without taking them apart.
Use a toothbrush or sponge to scrub the faucet and remove loose limescale.
Rinse the faucet thoroughly with clean water to remove any acetic acid residue.
It is important to note that acetic acid can damage some surfaces, such as marble or natural stone surfaces. Also, acetic acid should not be used on surfaces where a protective finish, such as paint or sealant, has been applied.
Before using acetic acid to remove limescale , it is advisable to carefully read the manufacturer’s instructions and check the compatibility of the acid with the surface to be cleaned.