Here’s how to deep clean all the floors in your home without spending a penny
A pleasant and comfortable interior goes hand in hand with a thorough cleaning of all the surfaces in the house, especially the floors. The latter are put to the test between comings and goings, bacteria and dirt from outside. To keep your home clean, we reveal the procedure to follow to naturally clean all types of floors.
Dust, dirt and microbes affect the quality of your floors and even that of the air inside your home. In addition, to prevent your tile, marble, terracotta or parquet floor from being damaged over time, good maintenance is essential. However, it should be noted that each type of floor requires different maintenance . Some products, even natural ones, may not be suitable for the floor of your home. We reveal to you what type of cleaner to use to maintain your floor covering.
How to clean all types of floors in your home with natural products?
Before you start with the task of cleaning the floor, you should first empty the room and get rid of any rugs, chairs, or even toys and objects lying around. Sweep or vacuum the floor to remove dust. Also consider vacuuming under furniture such as tables and sofas. Then, dust the furniture with a slightly damp microfiber cloth to catch any particles. Once this dusting step is done, you can move on to cleaning the floor.
– Clean Marble Floor
Marble Floor
pinterest-logo
Marble Floor – Source: spm
If you have a granite, marble, or stone floor and want to use eco-friendly and inexpensive products, you can prepare a cleaner with these natural ingredients. You will need:
2 tablespoons of baking soda
1 tablespoon of liquid Marseille soap
2 liters of water
Pour the water into a bucket, then add the baking soda and Marseille soap. Mix everything together and soak your mop with this mixture, then wipe it over the entire surface to be cleaned to remove dirt and bad odors.
You should also know that it is not recommended to use acidic products such as vinegar, lemon or citric acid on natural stone, granite or marble surfaces, at the risk of damaging them over time.
– Clean tile floor
Floor tiles can get dirty quickly and joints that darken over time look unattractive. To get rid of dirty tiles, use dishwashing liquid diluted in water and mop the entire surface.
clean tile floor
pinterest-logo
Clean joints with baking soda – Source: spm
To clean joints, use baking soda, which is also a powerful bleaching product. To take advantage of its stripping powers, mix three parts baking soda and one part water to obtain a consistent paste. Spread it over the joints with a brush and rub. Leave it to act for a few minutes before rinsing and wiping with a dry cloth.
– Cleaning terracotta floors
terracotta floor
pinterest-logo
Terracotta floor – Source: spm
Terracotta floors are very typical and give a warm and welcoming side to a house. To maintain them properly, it’s all about finding the right cleaners for this material. And for good reason, this type of floor tends to absorb dirt and stains in particular. To clean it, you will need the following ingredients:
½ cup white vinegar
2 tablespoons dish soap
A few drops of lemon essential oil
2 liters of water
Mix all the ingredients in a bucket, then dip a microfiber cloth in the solution and wipe the floor to clean and shine it. Dry the floor with another dry cloth.
– Cleaning parquet
wooden floor
pinterest-logo
Parquet – Source: spm
This wooden surface is very delicate and requires a lot of care and maintenance. To clean it, take the following ingredients:
2 tablespoons of baking soda
1 tablespoon of castile soap
2 liters of water
Mix the ingredients in a bucket and use the preparation to clean your floor with a mop. Then dry the wooden surface with a dry cloth to avoid leaving traces of moisture on the parquet.
Now you know that for each type of floor there is a special cleaner, in order to maintain and care for your surfaces as long as possible.
😊 only educated members will say thank you 😊 The rest in the first comment