Mix to get rid of mold on the walls of the house definitely

---

Mold on the walls of the house is not only unsightly, but it can also be harmful to health. Fungi and spores that form on wet surfaces can trigger respiratory problems, allergies, and other health problems, especially in people with weakened immune systems.

Effectively and permanently removing mold is crucial to maintaining a healthy home environment. Here’s how to make two homemade mixes that will help you get rid of mold on your walls for good.

How to prepare mold removal mix

Homemade Mix 1

Ingredients:

• 400 ml of water
• 30 ml bleach

Instructions:

1. In a bowl, mix 400 ml of water with 30 ml of bleach. Bleach is effective at killing mold and spores. Be sure to wear gloves and work in a well-ventilated area.
2. With the help of a sprayer, apply the mixture directly to the areas affected by mold. Leave it on for about 15 minutes so that the bleach can penetrate and kill the mold deeply.
3. After 15 minutes, rinse the surface with clean water and a cloth. Dry it thoroughly to prevent mold from growing back.

Homemade mix 2

Ingredients:

• 350 ml water
• 50 ml white vinegar
• 50 ml of alcohol
• 1/2 tablespoon baking soda

Instructions:

1. Mix 350 ml of water with 50 ml of white vinegar and 50 ml of alcohol in another sprayer. Vinegar has antimicrobial properties, and alcohol helps to disinfect and dry the surface quickly.
2. Add 1/2 tablespoon of baking soda to the vinegar and alcohol mixture. Baking soda helps remove moldy stains and odors.
3. Spray this second mixture on areas previously treated with bleach and any other areas where mold might grow. Let it sit for 10 minutes.
4. Use a brush or sponge to scrub the affected areas, then rinse with clean water. Make sure to dry the surface thoroughly with a dry cloth.
5. Keep the room well ventilated to ensure that the wall dries completely, which helps prevent mold from returning.

Removing mold from walls is essential to maintaining a healthy environment in your home. These homemade mixes are effective and easy to prepare, and will help you get rid of mold for good. Always remember to wear gloves and properly ventilate the area when working with these solutions. Keeping the house free of moisture and well ventilated is key to preventing mold from forming in the future.

Councils

1. Maintain good ventilation:
   • Proper ventilation is key to preventing mold from forming. Be sure to open windows and doors regularly to allow air circulation. Use fans or dehumidifiers in areas prone to moisture, such as bathrooms and basements.
2. Repairs leaks and leaks:
   • Mold thrives in moist environments. Inspect your home regularly for leaks or water leaks in ceilings, walls, and pipes. Repair any problems immediately to prevent moisture buildup that can lead to mold growth.
3. Clean and dry wet areas:
   • After any activity that generates moisture, such as showering or washing clothes, be sure to clean and dry surfaces thoroughly. Use a towel or dry cloth to remove excess water from the walls and floors.
4. Use anti-mold paints:
   • There are special paints on the market that contain anti-mold agents. Consider using these paints in moisture-prone areas such as bathrooms and kitchens. These paints create a barrier that makes it difficult for mold to grow.
5. Monitor indoor humidity:
   • Keep the humidity level inside your home below 60%. You can use a hygrometer to measure humidity and make sure it stays at safe levels. If the humidity is high, use dehumidifiers to reduce it.

By implementing these tips along with homemade mold removal mixes, you can keep your home clean and healthy, avoiding health problems associated with mold and improving indoor air quality.